Jump to content

Bugatti Type 32

From Wikipedia, the free encyclopedia
Bugatti Type 32
Overview
ManufacturerAutomobiles Ettore Bugatti
Production1923
5 units (1 prototype + 4 race-ready)[1]
AssemblyFrance: Molsheim-Dorlisheim, Alsace (Usine Bugatti de Molsheim)
DesignerEttore Bugatti
Body and chassis
ClassRacing car, Formula Libre
Body styleUnderslug type
RelatedType 57G
Powertrain
Engine2.0 L (1991 cc/121 in³) straight-8 engine
Transmission3-speed + reverse
Dimensions
Wheelbase1994 mm
Width1052 mm
Curb weightest. 650 kg
Chronology
PredecessorBugatti Type 30
SuccessorBugatti Type 35

The Bugatti Type 32, commonly called the Tank de Tours, was a streamlined racing car built in 1923. It was built to compete in the French Grand Prix, which was held on July 2 in Tours on the same year.[2][3]

The nickname of the car comes from its particular shape, which resembles battle tanks of its era,[a] as well as the location of the Grand Prix. Another Bugatti model that earned the nickname "Tank" for its design and aerodynamics was the 57G Tank from 1936.[4][5]

Overview

[edit]
Ernest Friderich driving Bugatti "Tank" Type 32 at the 1923 A.C.F. GP (in Tours).

Designed especially for the 1923 French Grand Prix in Tours, this original car by Ettore Bugatti was designed to be simple and quickly assembled.

The first prototype with an aerodynamic aluminium body was built in six months around the 1,991cc in-line 8-cylinder engine used in prior Bugatti Type 30. The engine rated 90 hp for the competition and weighted for approximately 650 kg.

Design

[edit]

Compared to the previous competition model, the Type 29,[b] the Type 32 only shared the motorization with the previous model.

Type 32 was small in size, with a wheelbase of 1,994m, like the Bugatti Type 13, 5 models of Type 32 were produced. In addition to the prototype, four racing capable cars were made,

Each model came with the 2.0 L (1991 cc/121 in³) straight-8 engine based on that in the Type 30. It was a longitudinal engine with eight cylinders in line and five bearings with main bearings on the crankshaft. It had 3 valves per cylinder, two intake and one discharge, operated by a single camshaft Brakes hydraulically actuated at the front and mechanically actuated (metal cable) at the rear.[6][7][8]

The Type 32 was the first Bugatti to be fitted with roller-bearing big ends in order to improve the bottom-end reliability.[c]

The Type 32 also broke new ground (for a racing Bug) by using a three-speed and reverse transaxle unit, the exceptionally short wheelbase and long straight-8 engine making a conventional gearbox difficult to accommodate. It also heralded a hydraulic front brake actuation.[9]

Despite the low center of gravity, its grip on the road was not good. The reason for this was due to its aerodynamics being similar to that of a wing profile, which meant that the vehicle could tend to rise at high speeds. Also, its short wheelbase contributed to the problem.

Specifications

[edit]
  • Track: 41.4 in (1052 mm)
  • Power: 90 hp (67 kW)

Racing and legacy

[edit]

4 race-capable cars were built for the 1923 French Grand Prix. The following Type 32 participated at the Tours race:

  • No. 6, with Ernest Friderich, who finished third at the finish
  • No. 18, driven by the Prince of Cystria, retired on lap 12
  • No. 11, driven by Pierre de Vizcaya, retired at the start after an accident
  • No. 16, driven by Pierre Marco, retired on the third lap3

During the race, the Type 32 reached the top speed of 180 km / h on the main straight.[citation needed] The French GP was Type 32's only GP race. However, for example the No. 6 (chassis No. 4059) was acquired by Mr. Junek from Czechoslovakia, who was racing with the car for the rest of 1923 and won for example the 3rd hill climb Schöberbergrennen.

Type 32 was replaced by the brand's most successful model in racing, the Bugatti Type 35.

Another tank-bodied Bugatti racer, the 1936 Type 57G, was much more successful.[10]

Notes

[edit]
  1. ^ i.e tanks of World War I.
  2. ^ AKA "The Cigar", nicknamed for its conical shape
  3. ^ Bugatti was rather later than most manufacturers in the incorporation of a fully pressurised oil system, preferring a splash "spit and hope" delivery method.

References

[edit]
  1. ^ "1923 Bugatti Type 32 'Tank' - Images, Specifications and Information".
  2. ^ "Bugatti Type 32". 7 September 2017.
  3. ^ "Bugatti Type 32". 14 October 2011.
  4. ^ "The Bugatti revue: Bugattis by type".
  5. ^ "1923 Bugatti Type 32 'Tank' - Images, Specifications and Information".
  6. ^ "Bugatti Type 32 Tank". 6 April 2016.
  7. ^ "Bugatti Type 32". 30 October 2014.
  8. ^ "1923 Bugatti Type 32 Tank Replica".
  9. ^ "Wikiwix[archive]". archive.wikiwix.com. Archived from the original on 2021-04-10. Retrieved 2020-12-16.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  10. ^ "The Bugatti revue: Bugattis by type".